The Vito formwork is a steel framed panel system which is ready for use and very rugged.The 2.70 m, 3.30 m and 1.20 m panels have various widths from 45 cm to 1.20 m and can be delivered in steps of 15 cm or 5 cm. Profitable giant panels are also available.All Vito panels are based on sturdy 14 cm deep steel profiles for the edges. These edge profiles are prepared with a special shaping on the inside that allows application of the patented Vito connecting clamps.Tie holes are provided in the vertical edge profiles. Exact alignment of the erected panel is made possible through the recess of the base edge profile by using a crow-bar (or nail-remover).The 18 mm thick plywood sheet is supported by eight or ten intermediate bars of equal design. They also offer numerous possibilities for the attachment of Vito accessories.The steel frame of the Vito panel is completely hot-dip galvanized.All the panels can be combined in various ways, lying on their sides or standing upright. They can also be installed in a staggered arrangement as their interconnection is independent of any dimension modules. A panel depth of 14 cm guarantees good load-bearing capacity (80 kN/m²)